1126 comments found.
Does this transition pack work on CS 5.5?
Hello! Sorry for the long wait for my answer. Unfortunately not. CS6 will be required for use without extension and CC2014 will be used with Motion Bro.
Hi guys,
I’m moving to a new computer. Installed everything and working well. An old file now comes up with error:
ch = thisComp.layer(“Settings”).effect(“Flip Motion”)(1); if(ch 0){100} if(ch 1){-100}
Says “undefined value used in expression (could be out of range array subscript).
Not sure what this means? Thanks.
Hello! Please try this solution: https://motionbro.net/help/after-effects-troubleshooting/i-get-expression-errors-in-after-effects-cc-2019/
BINGO! That worked. Great support – thanks.
I’m very disappointed, I bought your product, and when am installing it gives me errors it doesn’t wanna install
And the HOW TO INSTALL, option show an old version of the Software, I don’t know what to do, cause, I tried to get in contact with you but there no direct email of a person I should speak to or assist in this regards
Hello! What version of After Effects are you using?
Am using AF version 13.0 2014 cc
Am struggling with Installing using , HOW TO INSTALL, instructions into the PC, the first part ( installation)
On the HOW TO INSTALL, you use Motionbro 2.0 but the one I got in a zipped fine it’s Motionbro.2.2.2
When I follow instructions the first (ZXP. installer) on installation process it says ( installation failed because the extension is not compatible with the installed application)
2. The second instructions ( on HOW TO INSTALL) when I type in the “Zip” on the setup (motionbro2 2.2), it doesn’t changed to a ZIPPED fine
Hey, I just got a new laptop and I would like to use the transitions on the new laptop. Is this possible or do I seriously have to buy them again?
Hello! Yes it is possible. You can use one purchase code on two devices.
Ok, thank you very much for the quick answer. But where do I find the purchase code?
Please check this page: https://motionbro.net/help/licensing/where-to-find-the-purchase-code/
I have no problem with AE 2018 WITH AE 2019 it asks for a verification code but I get an error 200 even with firewall turn off. I can not verify my code.
Hello! Sorry for the long wait for my answer. Please try this solutions: https://motionbro.net/help/after-effects-troubleshooting/when-installing-the-list-presets-file-an-error-occurs/#status-is-not-200-ok
how to open file .list ?
Hello! Did you watch this video tutorial? https://youtu.be/9EfiT44BHvw
Hello, i am getting this error after i imported my timeline from premiere pro, (everything is up to date), I put on a “Camera Simple ” preset, and try to play it back and it says,
After Effects Error: internal verification failure, sorry! {bad sub rect in ShrinkToSubRect}
(37 :: 111 )
Hello! I have not previously encountered such an error and, unfortunately, at the moment I have no idea why it appeared with you. I tried to find a solution but so far without success. Try asking this question on the Adobe forum. I found several similar queries there: https://forums.adobe.com/search.jspa?q=After+Effects+Error%3A+internal+verification+failure%2C+sorry!
It’s realy good !
Hey, where is the 3D Box? I don’t find it in the new motion bro 2.2.3
Hello! You are using the latest presets package (not extension)?
I don’t understand the différence ? I have motion bro 2.2.3
Motion Bro is an extension. I’m talking about the package of presets that you install through the extension. This step: https://motionbro.net/help/getting-started/how-to-install-a-presets-pack/
OK, understand. So, how can I have 3Dbox extention?
https://yadi.sk/i/Dtwnz65dSc3NrA
OK that’s good. I Find it! Thanks
Probably you have an old version of the HST preset pack installed. Please download the latest version and install it through the extension panel.
Do you have any similar transitions for devinci resolve?
Awesome! Realy cool project! 
Sorry to bring out the question that has already been post. The anchor point transition zoom suddenly do not work any more. When I move the anchor point, the zoom stay in its centered position. I have Win10, AE CC 2018, ver 15.0.0 (Build 180)
Hello! Does this problem occur when applying a new transition or in older projects? Do you use the latest version of the extension? https://motionbro.net/updates
Problem was with version 2.2., now with version 2.2.2 is solved, it works again! Many thanks for a fast reply!
Is this compatible with premiere pro?
Hi! Yes, but only through a dynamic link, as shown in this video: https://youtu.be/NpeQlrZzrvI
First off, great package. I’m on macOS Mojave (v10.14.3) and running After Effects CC 2019. After installing Motion Bro 2.2.2 and downloading the 1600 Seamless Transitions pack, I followed the instructions to install the “HST 5.3.list” file. Once the presets have installed, I receive the thumbnails of all the presets installed, (where the only preset I can use and apply is the “Split” preset) but as soon as I select the “1600 Seamless Transitions” thumbnail, all of the installed presets close.
As soon as I reinstall the “HST 5.3.list” file, I get all the presets, but I can only use the “Split” presets.
I’ve uninstalled and debugged the Motion Bro 2.2.2 in every way possible. Thank you for your time!
Hello! Please send your message to mail@videolancer.net. In your message, provide a link to this comment, and also please send a screenshot or video captur of screen, so that I understand how it looks visually.
Hi!
I’m getting an issue with the HST in after effets… When I add any preset in my composition, my video get bugged in a part of the animation in the corner of the video. This occour in many presets that animate a camera in th preset.
I’ve recorded a example of the bug that I\’m getting:
https://youtu.be/yK6OJ_s2gYEI am receiving a 25 :: 237 error in AE when I try to play a timeline using the 3D Box effect: “After Effects error: G returned invalid max_result_rect from PF_Cmd_SMART_PRE_RENDER ( 25 :: 237 )”. I’m using a Mac Pro, OSX 10.13.6. The sequence fails to render in Media Encoder as well.
Hello! Could you tell me the exact name of the transition on which this error appears?
3D Box, Ease 1, left arrow <- The other 3D Box transitions seem to work.
I think I found out the reason. I fixed it and will upload the project on videohive.net in the near future. As a temporary solution, try opening the transition composition and turning off these two layers (see screenshot): https://yadi.sk/i/TmJtpdosN-lsPg I apologize for these inconveniences and thank you for the useful feedback!
Hello do some one know hoe to install this pack to adobe premier pro cc?
Hello!
Sorry, but the Motion Bro extension is not intended for Premiere Pro. Only for After Effects.
For Premiere Pro please use the method shown in this video: https://youtu.be/NpeQlrZzrvI
In addition, we have a separate package that was created directly in Premiere Pro: https://videohive.net/item/handy-transitions-for-premiere-pro/22125468
Are there instructions on how to update? I’m having issues with 3.3 and I’d like to update to 5.3. Please advise. Thank you.
Hi! Did you watch this video tutorial? https://youtu.be/9EfiT44BHvw
Thank you!
hi, i want to buy this but i don’t know how to use this, please guide me, i am not a professional video editor, what softwares i will need and do i need extra plugins to use this. thank you
Hello! You will need After Effects version CC 2014.2 or higher. You can watch this how-to-use video: https://youtu.be/9EfiT44BHvw
Can I apply these transitions to Text and other objects (Charts & Bars) as a whole scene or on a group?
Hello! Sorry for the long wait for my answer. Transition transforms all content that is located under the transition layer. If you want to apply an effect to a specific group of layers, you can do it using a separate Pre Comp.
