752 comments found.
Hello, I have Premiere CC 2018 not installed on the C hard disk but on F. In your manual is a link but it must be premiere installed on C to get into the hidden folder. How do I get the typoking folder installed in my premiere right now? Thanks and kind Regards
Hello there
Actually that folder ” Users\”your username”\AppData\Roaming\Adobe\Common\Essential Graphics ” is located wherever your system operation system has been installed so if you have windows on drive F you can find that folder there.
Hi, thanks. Windows is on “C” just Adobe is on “F”. And if I do everything as you describe and copy the data in the Appdata folder on “C” – they are not in Premiere. or do I make a mistake here that I do not notice? Thanks for the answer.
Thanks for letting us know about the situation , actually it seems there is a conflict there which we have 2 solutions for it
1 – install the application on drive C
2 – import presets manually https://www.imageupload.co.uk/image/EUPB https://www.imageupload.co.uk/image/EUPDHi there, Bought you’re package. Very nice. But when using for instance 79. Corporate and I change the text. The surrounding boxes on the words don’t scale along. Can’t find it where to change it.
Hello there Please take a look at following images to see how text modification works on that item
https://www.imageupload.co.uk/image/ECIu https://www.imageupload.co.uk/image/ECIxIs see thx, but the aligning is not perfect. And with a smaller font you want smaller boxes. Too bad this can’t be adjusted easily.
Thank you very much for your suggestions , surely we will consider them for our future updates.
Check animation composer, they scale surrounding boxes accordingly to the font and center properly. Can’t be that hard. Looking forward to your update.
Thanks for your suggestion again.
I have been using this plugin in After Effects for a couple days and it seems there is quite a few small glitches.
I don’t have time to test all of them but here are my findings for the all of the items in the lower third category:
Lower Thirds # 01, 02, 04, 05, 06, 09 ,10, 12, 16, 19 & 20 all have the same problem in the time remapping sequence: the frame right before the “Freeze Out” marker/handle has a motion blur glitch (just on that one frame), the only solution seems to be disabling motion blur.
Lower Third #03 it seems like the mask on Text 01 is not set up properly, it doesn’t follow the box during the off transition like it does in the preview thumbnail.
Lower Third #08 Text 01 is turned on by default but should be turned off by default as it is supposed to be an alpha invert matte of the box layer below.
Hello there , thanks for your efforts , it’s deeply appreciated , we will consider those issues to be fixed in our future update for sure.
When is the FCPX version coming out? I’ll definitely buy this again for Final Cut ProX.
Thanks for your suggestion , we will consider it in our future plan but we can not mention any specific date.
What if you want to change the duration of the text animation? I havent figured out a way to make texts last longer.
How to make photo animation. For example i have 5 photos, zoom in zoom out, fade in fade out, left to right, right to left. Thanks
Hello there, sorry but your question is not clear, images are all available in their composition and there you can apply animation to them individually,.
for example: i have 5-10 photos then i want to create animation just simple for each photo. How can i do that? Thanks
Actually, that’s not really Type builder related subject but you can take a look at
https://www.youtube.com/watch?v=X3i3MtdmoEI https://www.youtube.com/watch?v=XLPchE7DPQE https://www.youtube.com/watch?v=D7kfx55ci8AGOOD WORK!!!
Thank you 
Hi! I boiught this. How do I get it intop After effect? In the download there was a link to documentation, but that link only led to a general info page about the product. Where can I find more information and documentation, and how do I start using this? Thanks!
Hello there
Please take a look at https://help.pixflow.net/hc/en-us/articles/360000475493-Motion-Factory-Type-Builder-Introduction-Installation
Hi. I want to test the free pack from motion factory but I install the program and I do not know where is it !! .. I can not open the program.
Hello there Please take a a look at https://help.pixflow.net/hc/en-us/articles/360000475493-Motion-Factory-Type-Builder-Introduction-Installation
Hi .. You sell this product only in envato market ? .. or it is for sell in elements envato ? I can not see it there
Hi , the only market place we’re selling type builder in it is VIdeoHive.net
Hello! Is it possible to change graphics and shapes? Thanks!
Hello there , most of elements are customize-able and you can find them in assets folder when you create a new composition
Do you have a tutorial on how do change graphics? Or if you can write if there are few simple steps? Thanks!
I already have the AE version and I won’t mind paying for a FCPX version. Do you intend to create a FCPX version just like: https://videohive.net/item/30-simple-titles-for-final-cut-pro-x/19631556 ???
Sorry but for now TypoKing is only available on AE platform.
Hi, I have purchased the TypoKing | Title Animation” and i’m trying to download the Motion Factory Toolkit from the link that you provided, but I receive the following message: ERR_CONNECTION_TIMED_OUT
Thanks for letting us know , the issue will be resolved in next 12 hours so please check again then.
hello, i do not know if you recieve my emails so i will write again, organized: 1. I purchased the typo king (500 titles) 3 days ago. unfortunately i did not succeed to activate premiere version and neither the after effects version of tipo king. i have premioere pro cc 2018 and after effects cc 2018 istalled on my edditing system, and i downloaded the motion factory according to your guidance manual. 2. i followed all your guidance links very very carefully, but it’s not resolving the problem. 3. in premiere after i followed all your installation steps, and tried to drag title to the timeline, i recieved the error message: “the motion graphics template was created in after effects. to use the template in premiere pro, please install after effects (trial or license) and retry”... 4. in after effects, when i try to drag the relevant file of the last version of after effects to the title builder, i recieved the message that installation faild…
in conclusion – i spent way to much time and energy on emails, instruction guides in vane…. i suggest that we will do 1 of this 2 options: a. you address me to someone more qulified which will do remote connect to my edit system and resolve the problem. b. give me refund of 59$ for the payment that i made. ofer
Hello there
Sorry to hear about the issue you’ve had with our product , we will contact you in our help center in next 24 hours to find a proper solution for your situation.
Tengo premier pro cc, no consigo dar con la instalación. pueden enviarme algún link de instalación?
Gracias! no sirve para premiere pro cc 2017?
You’re very welcome , it should work but for better performance and less issues we recommend our users to user the latest versions.
hey , need a link to the font pack and it need to work ! i c’ant export without them :/ i put mucho hours in my project and need to export it asap
To install all fonts you must Download them from here first,
Put “0” in price box and download for free.
Unzip the fonts and installing them by double-clicking
hello, i tried to drag the typoking pack for after effects according to your instructions into the title builder, and the motion factory send a message that the installation failed…. please advice….. i spent hours to figure it out myself and i only get the explanation link which i follow very carefully….
Hello there
Please visit https://help.pixflow.net/hc/en-us/articles/360000475493-Motion-Factory-Type-Builder-Introduction-Installation which mentioned “Premiere Pro Installation” which is a little different than drag and drop system.
Please make sure you are using latest version of AE and Motion factory too.
after that please submit your ticket by visiting http://pixflow.net/ticket/
hello, I purchased the typoking (500 titles) 2 days ago, I follow all the installation steps, and when I import the title to the time line I get an error message that says: “the motion graphics template was created in after effects. to use the template in premiere pro, please install after effects (trial or license) and retry. I have after effects cc2017 and premiere cc 2017 installed. please advice… one more query… does the type builder plugin work with the premiere pro? if yes how can I activate it? many thanks, ofer
hello, i tried to drag the typoking pack for after effects according to your instructions into the title builder, and the motion factory send a message that the installation failed…. please advice….. i spent hours to figure it out myself and i only get the explanation link which i follow very carefully….
Hello there
Please visit https://help.pixflow.net/hc/en-us/articles/360000475493-Motion-Factory-Type-Builder-Introduction-Installation which mentioned “Premiere Pro Installation” which is a little different than drag and drop system.
Please make sure you are using latest version of AE and Motion factory too.
Followed directions on how to copy the files to Adobe Premiere Pro on Mac, but I can’t figure out how to get it to work.
Please take a look at https://help.pixflow.net/hc/en-us/articles/360000475493-Motion-Factory-Type-Builder-Introduction-Installation and if you had any question contact us by visiting http://pixflow.net/help
As I type in English, TypoKing keeps putting out Russian…I Think? How do I fix this? I’m working in Premiere Pro 2018.
Thank You for your response on the subject. I knew my C.C. was in English. I did some digging and found out about the fonts. I installed them, came here to report the problem. Shut my pc before your reply. Now, it is seen to be working okay. Thank You again!
Thank you for sharing your solution with us , hope everything goes well there.
